How to Choose Wood for Floor

Replacing your floor as you intersect old carpets, tiles, or bahakn buy a new home, teristal material that you find to make your choice.

You have 3 basic options depending on what you find under your battery.

Option 1 is Solid Hardwood Flooring.

Floors that require wooden or plywood subfloor. If you pull the carpet and find a surface that works well with your nails or glue, you’re lucky if you want a hard wood floor.

You may find something else on your plywood, floorboards, or subfloor. You may find hard, dusty, dirty, hardwood flooring already in place. It may look very bad, and you might think you should tear it to have a beautiful hardwood. Take heart – and ask a professional harga mdf to see it before you tear it. Old hardwood refinishing often brings amazing results.

With far less waste, high quality wood and lower cost than tearing and installing new wooden flooring, you can reassemble old ones. A professional refinisher will sand, stain and apply a protective coating. Scratches, dirt, wear is gone. Many homeowners are simply mesmerized when looking at the results you can get from a skilled professional carpenter.

You have a choice of hard wood or new hardwood if your subfloor is wood or plywood. But what if you do not find plywood or floorboards under your feet?

Option 2 is Laminate or Engineered Wood Floor

If your subfloor is concrete, then solid wood flooring should be avoided. So installing solid wood is not an option. You or your floor installer should use laminate floors or be engineered if you want a wooden look.

Laminates and engineered floors are often boards that float on top of your installed concrete. Laminates have a man-made layer. The top layer looks like real wood – often including drawings of birch, oak, pine or maple board. The engineered floor has thin thin wooden layers. You are not using stain or finish – this floor is finished.

The laminated and engineered floors work while you are undergoing refinishing basements and want the warmth of wood, but can not install hardwood. But what if your floor gets wet or heavily used?

Option 3 is Floor Tiles

Ceramic tiles or vinyl tiles are a good choice if your floor gets wet or gets heavy foot traffic, and you can not use a wooden look.

Ceramic tiles are often used in bathrooms, kitchens or mudrooms. You can use ceramics on plywood, backboard or concrete. A professional installer will have the tools to cut ublins and plan a balanced layout. Your professional installer will avoid bizarre looking pieces to fit your edge pattern. Your professional installer also gives you a safe surface and will remain stable and look good for years.

Leave a Reply

Your email address will not be published. Required fields are marked *